FEATURE:
Super voice frequency heated bedways.
Hardened and grounded gears in the headstock.
With 2 precision D degree taper roller bearings on the spindle.
Integrated deluxe cast iron floor stand.
Tolerance test certificate, test flow chart included.
|
SPECIFICATION |
CM6241×1000 |
|
|
CAPACITY |
||
|
Swing over bed |
410mm(16＂) |
|
|
Swing over cross slide |
255mm(10＂) |
|
|
Swing in gap |
580(23＂) |
|
|
Length of gap |
250(10＂) |
|
|
Distance between centers |
1000mm(40＂) |
|
|
Center height |
20.5＂ |
|
|
Width of bed |
250(10＂) |
|
|
HEADSTOCK |
||
|
Spindle nose |
D1-6 |
|
|
Spindle bore |
52mm(2＂) |
|
|
Taper of spindle bore |
No.6Morse |
|
|
Range of spindle speed |
16 changes 45-1800r/min |
|
|
FEEDS AND THREADS |
||
|
Max.travel of compound rest |
102mm(4＂) |
|
|
Max.travel of cross slide |
210mm(8-1/4＂) |
|
|
Leadscrew pitch |
4T.P.I. |
|
|
Max.Section of tool |
20×20mm(13/16＂) |
|
|
Longitudinal feeds range |
0.05-1.7mm/rev(0.002＂-0.067＂/rev) |
|
|
Cross oeeds range |
0.025-0.85mm(0.001＂-0.0335＂/rev) |
|
|
Metric threads range |
39kinds 0.2-14mm |
|
|
Inch threads range |
45kinds 2-72T.P.I |
|
|
Diametrical pitchesrange |
21kinds 44D.P. |
|
|
Module pitches range |
18kinds 0.3-3.5M.P. |
|
|
TAILSTOCK |
||
|
Dia.of tailstock sleeve |
50mm(2＂) |
|
|
Travel of tailstock sleeve |
120mm(4-3/4＂) |
|
|
Morse taper of tailstock sleeve |
No.4 Morse |
|
|
Cross adjustock |
±13mm(±1/2＂) |
|
|
MOTOR |
||
|
Power of main motor |
2.8/3.3kw(3.8/4.5HP)3PH |
|
|
Power of coolant pump |
0.1KW(1/8HP),3PH |
|
|
DIMENSION AND WEIGHT |
||
|
Overall dimension(L×W×H) mm |
1940×850×1300 |
1940×850×1320 |
|
Packing size(L×W×H)mm |
2060×900×1640 |
2060×900×1640 |
|
Net weight/Gross weight |
1500/1750 |
1550/1800 |
|
STANDARD ACCESSORIES |
||
|
200mm Three Jaw Chuck and Adapter 320mm Four Jaw Chuck and Adapter 300mm Face Plates Steady Rest Follow Rest Thread Chasing Dial Mt/6/4 Sleeve and MT 4 Center Oil Gun One set of Wrenches Operation Manual |
||
|
SPECIAL ACCESSORIES |
||
|
1. 200mm Driving plate 2.Quick change Tool Post 3.3.Taper Turning Attachment |
||